How to Protect Silicone Rubber Mold
Release time:
2023-01-07
The silicone rubber seal ring shall be cleaned with hot water or in the dishwasher. Do not use abrasive detergent or foam to clean it. Make sure that the silicone cup is dry before each use and storage....
1. The silicone rubber seal ring shall be cleaned with hot water or in the dishwasher. Do not use abrasive detergent or foam to clean it. Make sure that the silicone cup is dry before each use and storage.
2. The silicon calibration cup can only be used in the oven. It must not be directly used in the oven or microwave oven on gas or electricity, or directly above the heating plate or under the barbecue. Do not use a knife or other sharp tools on the silicone cup, and do not press, pull or force each other.
3. The silica gel cups shall be separately opened on the flat baking tray during baking. Do not dry bake the mold. For example, if you have a six mold, you can only fill three molds, and the other three molds should be filled with water. Otherwise, the mold will be baked out and its service life will be reduced. In order to achieve a good baking effect on the baked products, a small amount of anti stick baking pan oil can be lightly sprayed on the surface of the silica gel cup before baking.
4. Silicone rubber mold protection: The silicone cup can be heat-resistant to 500 degrees Fahrenheit and can withstand transient temperature changes, such as directly moving the baking cup from the refrigerator to the oven. When baking is completed, please remove the entire baking pan from the oven and place the baking products on the grid to be cooled until completely cooled.
Key words: Silicone rubber products,Mould design